|
Shenzhen Wonsun Machinery & Electrical Technology Company
|
Gold Index: 12357
Anti Collision Swing Out 90 / 180 Folding Automatic Boom Barrier
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Swing Out Function Automatic Boom Barrier With LED Rubber Boom
Advantages
Swing Out Function Automatic Boom Barrier With LED Rubber Boom
Advantages
| 1. steady function, sensitive reaction, low noise |
|
2. The case shell is made of thickened steel which is shaped by 13 process flow. Without fading ,waterproofing, not rusty, durable. |
| 3. high sensitive limit switch, pole can be instant turn on and off .accurate location. |
| 4. control system adopts hi-tech digital chip technology. |
| 5. the anti-collision function. Protecting the passenger |
| 6. the inductive function ,with the digital vehicle detector |
|
7. the movements adopts the most steady running mode –non-constant speed mode. Or the variable speed excogitation. (Slow – quick – slow ) .This function makes the operation steady and prolongs the working life. |
Technial Data
Material:Cold roll plate,galvanized plate or stainless steel
Power:120w
Voltage:220V ± 10%, 110V ± 10%
Relative humidity:<90% coagulation free
Working temperature:-45°C to 75°C
Motor rotational speed:1400rmp
Communication with customers
1) Q: Connected power and press open/close button but traffic barrier gate no action?
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check fuse and power in controller |
|
2 |
Battery of remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when
it is at right position, the motor still running and not stop?
|
A |
Reason |
Solution |
|
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to correct position |
|
2 |
Main controller failure |
Change a new one |
3) Q: Motor running but traffic barrier gate arm no action?
|
A |
Reason |
Solution |
|
1 |
Barrier arm at 45° position where is hard to move |
Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
|
2 |
Tension of balancing spring not suitable
Shenzhen Wonsun Machinery & Electrical Technology Company [China (Mainland)]
Business Type:Manufacturer |
