|
Shenzhen Wonsun Machinery & Electrical Technology Company
|
Gold Index: 12357
Two Fence Car Park Barrier Systems With Loop Detector For Entrance And Exit
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Two Fence Car Park Barrier Systems With Loop Detector For Entrance And Exit<span style="font-family:arial,helveti
Two Fence Car Park Barrier Systems With Loop Detector For Entrance And Exit
Barrier gate voltage:220V/110VAC
Barrier gate housing color: Blue , Orange
Barrier gate arm type:straight, 90 degree folding arm, 180 degree folding arm. two fence arm, three fence arm
Barrier gate speed:0.6sec,1sec,1.8sec, 3sec. 4sec, 6sec
Advanced Features:
1)clutch key can be used to open the clutch when power off.
2)Fan cooling machine reduce the motor temperature by high frequency using, never get heat-protecting, unique temperature calefaction design for low temperature using, prevent freezing in cold weather.
3)Exactitude aluminium alloy die-casting motor base reduce the noise and joint abrasion to prolong the barrier gate working life.
Model Selection and Differences
Communication with customers
1) Q: Connected power and press open/close button but traffic barrier gate no action?
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check fuse and power in controller |
|
2 |
Battery of remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?
|
A |
Reason |
Solution |
|
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to correct position |
|
2 |
Main controller failure |
Change a new one |
3) Q: Motor running but traffic barrier gate arm no action?
|
A |
Reason |
Solution |
|
1 |
Barrier arm at 45° position where is hard to move |
Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
|
2 |
Tension of balancing spring not suitable |
Adjust spring exactly |
|
3 |
Low working voltage |
Check the voltage and power |
4) Q: When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?
|
A. |
Reason |
Solution |
|
Shenzhen Wonsun Machinery & Electrical Technology Company [China (Mainland)]
Business Type:Manufacturer |
