Post Offer Free
Shenzhen Wonsun Machinery & Electrical Technology Company  

Gold Index: 12357

You are here: home  > Remote Control High Speed Car Parking System Automatic Barrier Gate System

Remote Control High Speed Car Parking System Automatic Barrier Gate System 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: DZTP-129-A

Remote Control High Speed Car Parking System Automatic Barrier Gate System
 
<spa

Remote Control High Speed Car Parking System Automatic Barrier Gate System

 

What is the davantages of Wonsun barriers?

 

1)The humanized clutch device:in case of power off, unlock the clutch device and raise the boom manufally. By the time the power is supplied, lick the clutch device to make it working normally again.

2)Special spring device:Both the compression spring and tension spring can be used in the machine, Using the compression sprin can avoid accidents caused by the tension spring.

3)Three control buttons:for boom raising, falling and pausing.

4)Boom backtrack function:the boom will rise if hits something when falling.

5)Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed.

6)Both external and internal loop detectors are supported.

7)"open","close" and "stop" controlling interfaces.

8)RS-485 communication serial interface(optional)

9)Traffic light signal connection device: red light for stop,green light for pass.

10)Remote control and wire control for selection.

 


Model Selection and Differences

 

 


Specifications

 

Model

WST1211

Working Temperature

-40+75

Voltage

220V±10%, 110V±10%, 50/60HZ

Rated power

80W

Relative humidity

≤90%

Remote control distance

≥30m

Net weight

48kgs

Speed

1S,1.8S,3S, 6S

Max boom length

6 meters

Motor Rotational speed

1400rmp

Protection Degree

IP44

 


Communication with customers
 
1)     Q: Connected power and press open/close button but traffic barrier gate no action?

 

A

Reason

Solution

1

Fuse blown

Check fuse and power in controller

2

Battery of remote control powered off

Change a new one

3

External protection circuit break or at protecting status

Open the barrier door and click OPEN/CLOSE button on control box

4

Same frequency interference

Check photocell and loop detector

 
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?

 

A

Reason

Solution

1

bigPhoto
 Mr. Miss. 84536531

Tel: 86-755-84536531
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Shenzhen Wonsun Machinery & Electrical Technology Company [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (255)