Remote Control Vehicle Traffic Barrier Gate Automatic Toll Barrier Gate WST-116 manufacturer from China Shenzhen Wonsun Machinery & Electrical Technology Company

Remote Control Vehicle Traffic Barrier Gate Automatic Toll Barrier Gate

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: WST-116

Remote Control Vehicle Traffic Barrier Gate Automatic Toll Barrier Gate

What is the davantages of

Remote Control Vehicle Traffic Barrier Gate Automatic Toll Barrier Gate

What is the davantages of Wonsun barriers?

1)The humanized clutch device:in case of power off, unlock the clutch device and raise the boom manufally. By the time the power is supplied, lick the clutch device to make it working normally again.

2)Special spring device:Both the compression spring and tension spring can be used in the machine, Using the compression sprin can avoid accidents caused by the tension spring.

3)Three control buttons:for boom raising, falling and pausing.

4)Boom backtrack function:the boom will rise if hits something when falling.

5)Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed.

6)Both external and internal loop detectors are supported.

7)"open","close" and "stop" controlling interfaces.

8)RS-485 communication serial interface(optional)

9)Traffic light signal connection device: red light for stop,green light for pass.

10)Remote control and wire control for selection.

Model Selection and Differences

Specifications

Model	WST1211
Working Temperature	-40+75
Voltage	220V±10%, 110V±10%, 50/60HZ
Rated power	80W
Relative humidity	≤90%
Remote control distance	≥30m
Net weight	48kgs
Speed	1S,1.8S,3S, 6S
Max boom length	6 meters
Motor Rotational speed	1400rmp
Protection Degree	IP44

Why choose us?

1. OEM Brand, Logo, Label available
2. 1 Year Standard Warranty, excellent after-sales service
3. 24h*7d at your service to give you best support
4. Detailed installation manual and wiring diagram to make everything be easy
5. Fast finishing time for you to become more competitive at your local market :3-5 days for small order.

Communication with customers

1) Q: Connected power and press open/close button but traffic barrier gate no action?

A	Reason	Solution
1	Fuse blown	Check fuse and power in controller
2	Battery of remote control powered off	Change a new one
3	External protection circuit break or at protecting status	Open the barrier door and click OPEN/CLOSE button on control box
4	Same frequency interference	Check photocell and loop detector

2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?

A	Reason	Solution
1	Limit switch	Adjust the horizontal/vertical limit switch to correct position
2	Main controller failure	Change a new one

3) Q: Motor running but traffic barrier gate arm no action?

A	Reason	Solution
1	Barrier arm at 45° position where is hard to move	Unlock clutch and manually rotate arm to horizontal or vertical position then try again
2	Tension of balancing spring not suitable	Adjust spring exactly
3	Low working voltage	Check the voltage and power

4) Q: When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?

A.	Reason	Solution
1	Length adjustment of connecting rod not correct	Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at 180° horizontal position if master rod and slave one are in the same straight line
2	Nuts on the limit switch loose	Tighten the nuts when arm at 90° vertical and 180° horizontal position